Drawing a TRUE Involute spur Gear - Printable Version +- DeltaCad User's Group Forums (http://www.deltacadusersgroup.org/Forums) +-- Forum: Help Desk (http://www.deltacadusersgroup.org/Forums/forumdisplay.php?fid=16) +--- Forum: Tutorial Comments (http://www.deltacadusersgroup.org/Forums/forumdisplay.php?fid=24) +--- Thread: Drawing a TRUE Involute spur Gear (/showthread.php?tid=344) Pages:
1
2
|
RE: Drawing a TRUE Involute spur Gear - AlwMVMO - 08-09-2017 Did you enter 0 for number of teeth on the second gear? You can enter 0 on 1st gear ('Gear to be drawn') then a number on 2nd gear ('Other gear'). The pitch radius of the gear will be the 'Distance between centers'. You will still get an error 95 but you will get a gear. Or you can enter the same number of teeth on both gears and enter the pitch diameter in 'Distance between centers'. Then delete one of the gears. RE: Drawing a TRUE Involute spur Gear - Brock - 08-13-2017 Thanks for the reply, I realise now that I made a mistake, that I kept repeating. I was entering zero for the diameter ( ) Brock |