+- DeltaCad User's Group Forums (http://www.deltacadusersgroup.org/Forums)
+-- Forum: Main Forums (http://www.deltacadusersgroup.org/Forums/forumdisplay.php?fid=4)
+--- Forum: Request for Drawings, Symbols, Macros (http://www.deltacadusersgroup.org/Forums/forumdisplay.php?fid=7)
+--- Thread: Finish Code (/showthread.php?tid=991)
Finish Code - badhorse - 03-13-2019
Is there a quick way to add a surface finish code to the drawing of a machined part? I was surprised that I couldn't find one. Although I could have missed it.
thanks
RE: Finish Code - AlwMVMO - 03-13-2019
I didn't see any surface finish symbols either.
Looking at the different types of symbols that are available to the engineer it would probably be hard to add them to a $30 - $40 CAD software.
If you use just one type, you could draw them up yourself and create your own symbol file.
Then when you needed a surface finish you would just open the symbol file, pick the one you need and paste it into the drawing.
[ Guide to Surface Finish Symbols ]
Another thing missing from DeltaCad is [ Geometric Dimensioning and Tolerancing ]
RE: Finish Code - badhorse - 03-14-2019
(03-13-2019, 09:48 PM)badhorse Wrote: Is there a quick way to add a surface finish code to the drawing of a machined part? I was surprised that I couldn't find one. Although I could have missed it.
thanks
Thank you for the response.