(04-05-2016, 11:45 PM)AlwMVMO Wrote: (if you are using Windows 7)I am using Windows H8.
Go to the Windows Control Panel and open Devices and Printers and select your printer then go to Set Preferences and set your Pages per Sheet. You may have to set your paper size here also but watch out if you are printing different sizes you may have to go back into the Control Panel printer preferences to set for other paper sizes.
As for why it wants to do 2 copies...that is beyond me. It is only with DeltaCAD that it does this strange thing. Everything else it does one copy. The strange thing is, I tell it to do ONE copy...for some strange reason, when it previews, it shows ONE copy with TWO identical sheets. It only happens with DeltaCAD.
It says that I can use "US B (11x17)" or "Super B (13x19)" or "A3 (11.7x16.5)"
The only one that it could fit would be the "Super B" however, it centers it on a sheet 13 inches high...so the top border is off the sheet and the bottom border is too high from the bottom of the sheet. It seems that DeltaCAD does not support 12x18 sheets.
The other issue is that I cannot get vellum in 13x19 size. It is either 11x17 or 12x18. The next size is 17x22 or 18x24...and vellum is expensive. I don't really want to pay double the price then waste half of the sheet, obviously.