I've got a problem with the default paper size as shown in the "set print region" area. My default printer uses A4 paper which is 11.7" x 8.3". This is defined in the "printer setup" area.
In the "set print region" area however, the default paper size is set at 8" x 11". The default printer is correctly identified.
I have set the frame around my drawings to be 10.6" x 7.3". If I set the print scale to 1.00, it will print over 2 pages instead of fitting onto one. How can I change the default paper size?
Thanks,
Alan C.
Sorry,
I set my frame to be 10.9" x 7.5" not 10.6" x 7.3". The error arose because I measured a frame printed out to avoid it going over two pages.
Alan C.
In the "set print region" area however, the default paper size is set at 8" x 11". The default printer is correctly identified.
I have set the frame around my drawings to be 10.6" x 7.3". If I set the print scale to 1.00, it will print over 2 pages instead of fitting onto one. How can I change the default paper size?
Thanks,
Alan C.
Sorry,
I set my frame to be 10.9" x 7.5" not 10.6" x 7.3". The error arose because I measured a frame printed out to avoid it going over two pages.
Alan C.